dmesg - teste asm fish realizado pelo programa phoronix-test-suite

Return To teste asm fish realizado pelo programa phoronix-test-suite System Information

microcode: microcode updated early to revision 0x4, date = 2013-06-28
Linux version 4.10.0-35-generic (buildd@lcy01-33) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #39~16.04.1-Ubuntu SMP Wed Sep 13 09:02:42 UTC 2017 (Ubuntu 4.10.0-35.39~16.04.1-generic 4.10.17)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000d2e7dfff] usable
BIOS-e820: [mem 0x00000000d2e7e000-0x00000000d2ebdfff] ACPI NVS
BIOS-e820: [mem 0x00000000d2ebe000-0x00000000d2ecefff] reserved
BIOS-e820: [mem 0x00000000d2ecf000-0x00000000d2ee0fff] ACPI NVS
BIOS-e820: [mem 0x00000000d2ee1000-0x00000000d2ee1fff] reserved
BIOS-e820: [mem 0x00000000d2ee2000-0x00000000d2ee4fff] ACPI NVS
BIOS-e820: [mem 0x00000000d2ee5000-0x00000000d2f12fff] reserved
BIOS-e820: [mem 0x00000000d2f13000-0x00000000d2f13fff] ACPI NVS
BIOS-e820: [mem 0x00000000d2f14000-0x00000000d2f16fff] reserved
BIOS-e820: [mem 0x00000000d2f17000-0x00000000d2f18fff] ACPI NVS
BIOS-e820: [mem 0x00000000d2f19000-0x00000000d2f1cfff] reserved
BIOS-e820: [mem 0x00000000d2f1d000-0x00000000d2f1ffff] ACPI data
BIOS-e820: [mem 0x00000000d2f20000-0x00000000d2f23fff] reserved
BIOS-e820: [mem 0x00000000d2f24000-0x00000000d2f32fff] ACPI NVS
BIOS-e820: [mem 0x00000000d2f33000-0x00000000d3ffffff] reserved
BIOS-e820: [mem 0x00000000d7e00000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffbfffff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000117ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Sony Corporation VPCEB4E0E/VAIO, BIOS R1170Y8 01/28/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x118000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FC0000000 write-back
  2 base 0C0000000 mask FF0000000 write-back
  3 base 0D0000000 mask FFC000000 write-back
  4 base 100000000 mask FE0000000 write-back
  5 base 118000000 mask FF8000000 uncachable
  6 disabled
  7 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
total RAM covered: 3776M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 64K 	num_reg: 6  	lose cover RAM: 0G
e820: update [mem 0xd4000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xd2e7e max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fc940-0x000fc94f] mapped at [ffff95a7000fc940]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff95a700098000] 98000 size 24576
BRK [0x59c28000, 0x59c28fff] PGTABLE
BRK [0x59c29000, 0x59c29fff] PGTABLE
BRK [0x59c2a000, 0x59c2afff] PGTABLE
BRK [0x59c2b000, 0x59c2bfff] PGTABLE
BRK [0x59c2c000, 0x59c2cfff] PGTABLE
BRK [0x59c2d000, 0x59c2dfff] PGTABLE
BRK [0x59c2e000, 0x59c2efff] PGTABLE
RAMDISK: [mem 0x32ffc000-0x357f5fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0410 000024 (v02 Sony  )
ACPI: XSDT 0x00000000D2F1EE18 00005C (v01 Sony   VAIO     20110128 MSFT 00010013)
ACPI: FACP 0x00000000D2F17D98 0000F4 (v04 Sony   VAIO     20110128 MSFT 00010013)
ACPI: DSDT 0x00000000D2ECF018 00AE05 (v01 Sony   VAIO     20110128 INTL 20051117)
ACPI: FACS 0x00000000D2F2FF40 000040
ACPI: FACS 0x00000000D2F32D40 000040
ACPI: APIC 0x00000000D2F1DF18 00008C (v02 Sony   VAIO     20110128 MSFT 00010013)
ACPI: MCFG 0x00000000D2F31D18 00003C (v01 Sony   VAIO     20110128 MSFT 00000097)
ACPI: HPET 0x00000000D2F31C98 000038 (v01 Sony   VAIO     20110128 MSFT 00000003)
ACPI: SLIC 0x00000000D2F2AA18 000176 (v01 Sony   VAIO     20110128 Sony 01000000)
ACPI: SSDT 0x00000000D2F18018 0009F1 (v01 Sony   VAIO     20110128 INTL 20051117)
ACPI: SSDT 0x00000000D2F17C18 00014B (v01 Sony   VAIO     20110128 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000117ffffff]
NODE_DATA(0) allocated [mem 0x117fd3000-0x117ffdfff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x0000000117ffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009dfff]
  node   0: [mem 0x0000000000100000-0x00000000d2e7dfff]
  node   0: [mem 0x0000000100000000-0x0000000117ffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x0000000117ffffff]
On node 0 totalpages: 962075
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 13434 pages used for memmap
  DMA32 zone: 859774 pages, LIFO batch:31
  Normal zone: 1536 pages used for memmap
  Normal zone: 98304 pages, LIFO batch:31
Reserving Intel graphics memory at 0x00000000d8000000-0x00000000dfffffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 6 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xd2e7e000-0xd2ebdfff]
PM: Registered nosave memory: [mem 0xd2ebe000-0xd2ecefff]
PM: Registered nosave memory: [mem 0xd2ecf000-0xd2ee0fff]
PM: Registered nosave memory: [mem 0xd2ee1000-0xd2ee1fff]
PM: Registered nosave memory: [mem 0xd2ee2000-0xd2ee4fff]
PM: Registered nosave memory: [mem 0xd2ee5000-0xd2f12fff]
PM: Registered nosave memory: [mem 0xd2f13000-0xd2f13fff]
PM: Registered nosave memory: [mem 0xd2f14000-0xd2f16fff]
PM: Registered nosave memory: [mem 0xd2f17000-0xd2f18fff]
PM: Registered nosave memory: [mem 0xd2f19000-0xd2f1cfff]
PM: Registered nosave memory: [mem 0xd2f1d000-0xd2f1ffff]
PM: Registered nosave memory: [mem 0xd2f20000-0xd2f23fff]
PM: Registered nosave memory: [mem 0xd2f24000-0xd2f32fff]
PM: Registered nosave memory: [mem 0xd2f33000-0xd3ffffff]
PM: Registered nosave memory: [mem 0xd4000000-0xd7dfffff]
PM: Registered nosave memory: [mem 0xd7e00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
PM: Registered nosave memory: [mem 0xffa00000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffdfffff]
PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff95a817c00000 s107992 r8192 d31272 u262144
pcpu-alloc: s107992 r8192 d31272 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 947020
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3657804K/3848300K available (9068K kernel code, 1667K rwdata, 3828K rodata, 2228K init, 2364K bss, 190496K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:524544 nr_irqs:488 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2128.016 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.03 BogoMIPS (lpj=8512064)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 3 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K
ftrace: allocating 34225 entries in 134 pages
smpboot: Max logical packages: 4
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
smpboot: CPU0: Intel(R) Pentium(R) CPU        P6200  @ 2.13GHz (family: 0x6, model: 0x25, stepping: 0x5)
Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
core: CPUID marked event: 'bus cycles' unavailable
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
smp: Brought up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (8512.06 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xd2e7e000-0xd2ebdfff] (262144 bytes)
PM: Registering ACPI NVS region [mem 0xd2ecf000-0xd2ee0fff] (73728 bytes)
PM: Registering ACPI NVS region [mem 0xd2ee2000-0xd2ee4fff] (12288 bytes)
PM: Registering ACPI NVS region [mem 0xd2f13000-0xd2f13fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xd2f17000-0xd2f18fff] (8192 bytes)
PM: Registering ACPI NVS region [mem 0xd2f24000-0xd2f32fff] (61440 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 14:35:54, date: 10/09/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95A812A65C00 0003AE (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95A8129FE000 000891 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95A812A64400 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95A812AB4E00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0xe080-0xe087]
pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf600a000-0xf600a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf6008000-0xf60083ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf6000000-0xf6003fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf6007000-0xf60073ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xe070-0xe077]
pci 0000:00:1f.2: reg 0x14: [io  0xe060-0xe063]
pci 0000:00:1f.2: reg 0x18: [io  0xe050-0xe057]
pci 0000:00:1f.2: reg 0x1c: [io  0xe040-0xe043]
pci 0000:00:1f.2: reg 0x20: [io  0xe020-0xe03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf6006000-0xf60067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf6005000-0xf60050ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xe000-0xe01f]
pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xf6004000-0xf6004fff 64bit]
pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xf4c00000-0xf4c0ffff 64bit]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.0:   bridge window [mem 0xf4c00000-0xf5ffffff]
pci 0000:03:00.0: [1180:e822] type 00 class 0x080500
pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz.
pci 0000:03:00.0: reg 0x10: [mem 0xf3802000-0xf38020ff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.1: [1180:e230] type 00 class 0x088000
pci 0000:03:00.1: reg 0x10: [mem 0xf3801000-0xf38010ff]
pci 0000:03:00.1: supports D1 D2
pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.4: [1180:e822] type 00 class 0x080500
pci 0000:03:00.4: reg 0x10: [mem 0xf3800000-0xf38000ff]
pci 0000:03:00.4: supports D1 D2
pci 0000:03:00.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.1:   bridge window [mem 0xf3800000-0xf4bfffff]
pci 0000:04:00.0: [11ab:4381] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xf2420000-0xf2423fff 64bit]
pci 0000:04:00.0: reg 0x18: [io  0xb000-0xb0ff]
pci 0000:04:00.0: reg 0x30: [mem 0xf2400000-0xf241ffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.2:   bridge window [mem 0xf2400000-0xf37fffff]
acpiphp: Slot [1] registered
pci 0000:00:1c.5: PCI bridge to [bus 05-0c]
pci 0000:00:1c.5:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.5:   bridge window [mem 0xf0400000-0xf23fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [bus 3f]
pci 0000:3f:00.0: [8086:2c62] type 00 class 0x060000
pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000
pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000
pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000
pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000
pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000
ACPI: Enabled 3 GPEs in block 00 to 3F
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xd2e7e000-0xd3ffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io  0x0680-0x069f] has been reserved
system 00:00: [io  0xff00-0xff0f] has been reserved
system 00:00: [io  0xff10-0xff13] has been reserved
system 00:00: [io  0x0800-0x0803] has been reserved
system 00:00: [io  0x0400-0x047f] has been reserved
system 00:00: [io  0x0500-0x057f] has been reserved
system 00:00: [io  0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:04: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:04: [mem 0xf7fff000-0xf7ffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-0c] add_size 200000 add_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf6100000-0xf62fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xf6300000-0xf64fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xf6500000-0xf66fffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xf6700000-0xf68fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.0:   bridge window [mem 0xf4c00000-0xf5ffffff]
pci 0000:00:1c.0:   bridge window [mem 0xf6100000-0xf62fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.1:   bridge window [mem 0xf3800000-0xf4bfffff]
pci 0000:00:1c.1:   bridge window [mem 0xf6300000-0xf64fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.2:   bridge window [mem 0xf2400000-0xf37fffff]
pci 0000:00:1c.2:   bridge window [mem 0xf6500000-0xf66fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 05-0c]
pci 0000:00:1c.5:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.5:   bridge window [mem 0xf0400000-0xf23fffff]
pci 0000:00:1c.5:   bridge window [mem 0xf6700000-0xf68fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xf4c00000-0xf5ffffff]
pci_bus 0000:02: resource 2 [mem 0xf6100000-0xf62fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xf3800000-0xf4bfffff]
pci_bus 0000:03: resource 2 [mem 0xf6300000-0xf64fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xf2400000-0xf37fffff]
pci_bus 0000:04: resource 2 [mem 0xf6500000-0xf66fffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0xa000-0xafff]
pci_bus 0000:05: resource 1 [mem 0xf0400000-0xf23fffff]
pci_bus 0000:05: resource 2 [mem 0xf6700000-0xf68fffff 64bit pref]
pci_bus 0000:0d: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:0d: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:0d: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:0d: resource 13 [mem 0xe0000000-0xfeafffff window]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 40936K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcee7e000-0xd2e7e000] (64MB) mapped at [ffff95a7cee7e000-ffff95a7d2e7dfff]
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1507559759.532:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=20 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: mode is 1366x768x32, linelength=5504, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffbb3b01000000, using 4160k, total 4160k
Console: switching to colour frame buffer device 170x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x120
intel_idle: v0.4.1 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ADP1] (off-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (31 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (31 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf6008000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.10.0-35-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf6007000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.10.0-35-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x20655, pf=0x10, revision=0x4
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 3781ac46c2f7a743322097d3608bc638deea4293'
zswap: loaded using pool lzo/zbud
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
  Magic number: 5:215:586
rtc_cmos 00:01: setting system clock to 2017-10-09 14:36:00 UTC (1507559760)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ACPI: Battery Slot [BAT0] (battery present)
Freeing unused kernel memory: 2228K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1156K
Freeing unused kernel memory: 268K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 0)
sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
sky2: driver version 1.30
sky2 0000:04:00.0: Yukon-2 Optima chip revision 1
sky2 0000:04:00.0 eth0: addr f0:bf:97:0e:99:ae
[drm] Initialized
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part sxs apst 
mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
sdhci-pci 0000:03:00.4: SDHCI controller found [1180:e822] (rev 0)
sdhci-pci 0000:03:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
scsi host0: ahci
mmc1: SDHCI controller on PCI [0000:03:00.4] using DMA
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf6006000 port 0xf6006100 irq 25
ata2: SATA max UDMA/133 abar m2048@0xf6006000 port 0xf6006180 irq 25
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xf6006000 port 0xf6006380 irq 25
pci 0000:00:00.0: Intel HD Graphics Chipset
pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
pci 0000:00:00.0: detected 131072K stolen memory
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 410000) vs hw (e0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
sky2 0000:04:00.0 enp4s0: renamed from eth0
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] RC6 disabled, disabling runtime PM support
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
acpi device:3e: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ATA-8: TOSHIBA MK3252GSX, LV010A, max UDMA/100
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK3252GS 0A   PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1.2: new high-speed USB device number 3 using ehci-pci
tsc: Refined TSC clocksource calibration: 2127.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1eac822addd, max_idle_ns: 440795285886 ns
random: fast init done
usb 1-1.2: New USB device found, idVendor=0c45, idProduct=6409
usb 1-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-1.2: Product: USB 2.0 Camera
usb 1-1.2: Manufacturer: USB 2.0 Camera_FLV14
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: Optiarc DVD RW AD-7710H, 1.V0, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7710H  1.V0 PQ: 0 ANSI: 5
usb 1-1.6: new full-speed USB device number 4 using ehci-pci
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usb 1-1.6: New USB device found, idVendor=0489, idProduct=e00f
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.6: Product: Broadcom Bluetooth Device
usb 1-1.6: Manufacturer: Broadcom Corp
usb 1-1.6: SerialNumber: 90004EF29809
ata6: SATA link down (SStatus 0 SControl 300)
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input4
clocksource: Switched to clocksource tsc
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
random: crng init done
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Started Trigger resolvconf update for networkd DNS.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Created slice User and Session Slice.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[310]: Received request to flush runtime journal from PID 1
input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/SNY5001:00/input/input6
input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/SNY5001:00/input/input7
sony_laptop: SNC setup done.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
intel ips 0000:00:1f.6: No CPUID match found.
intel ips 0000:00:1f.6: IPS not supported on this CPU
ath: phy0: Enable LNA combining
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffbb3b00d40000, irq=16
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
wl: loading out-of-tree module taints kernel.
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl: module verification failed: signature and/or required key missing - tainting kernel
ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
audit: type=1400 audit(1507559775.866:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=690 comm="apparmor_parser"
audit: type=1400 audit(1507559775.866:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=690 comm="apparmor_parser"
audit: type=1400 audit(1507559775.866:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=690 comm="apparmor_parser"
audit: type=1400 audit(1507559775.866:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=690 comm="apparmor_parser"
audit: type=1400 audit(1507559775.866:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=689 comm="apparmor_parser"
audit: type=1400 audit(1507559775.866:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=689 comm="apparmor_parser"
audit: type=1400 audit(1507559775.870:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=693 comm="apparmor_parser"
audit: type=1400 audit(1507559775.874:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=694 comm="apparmor_parser"
audit: type=1400 audit(1507559775.874:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=694 comm="apparmor_parser"
audit: type=1400 audit(1507559775.874:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=694 comm="apparmor_parser"
Adding 4193276k swap on /dev/sda5.  Priority:-1 extents:1 across:4193276k FS
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:6409)
uvcvideo 1-1.2:1.0: Entity type for entity Extension 5 was not initialized!
uvcvideo 1-1.2:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-1.2:1.0: Entity type for entity Processing 3 was not initialized!
uvcvideo 1-1.2:1.0: Entity type for entity Camera 1 was not initialized!
input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
sky2 0000:04:00.0 enp4s0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with 58:98:35:80:7c:13
wlp2s0: send auth to 58:98:35:80:7c:13 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 58:98:35:80:7c:13 (try 1/3)
wlp2s0: RX AssocResp from 58:98:35:80:7c:13 (capab=0x11 status=0 aid=2)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
usb 1-1.6: USB disconnect, device number 4
sky2 0000:04:00.0 enp4s0: disabling interface
wlp2s0: deauthenticating from 58:98:35:80:7c:13 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ACPI : EC: event blocked
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 674.465 msecs
PM: late suspend of devices complete after 20.249 msecs
ACPI : EC: interrupt blocked
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 159.989 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 1
Broke affinity for irq 9
Broke affinity for irq 12
Broke affinity for irq 16
Broke affinity for irq 23
Broke affinity for irq 25
Broke affinity for irq 26
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Suspended for 1592.897 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x4
 cache: parent cpu1 should not be sleeping
microcode: sig=0x20655, pf=0x10, revision=0x2
microcode: updated to revision 0x4, date = 2013-06-28
CPU1 is up
ACPI: Waking up from system sleep state S3
ACPI : EC: interrupt unblocked
sdhci-pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz.
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 160.536 msecs
PM: early resume of devices complete after 2.101 msecs
ath: phy0: ASPM enabled: 0x42
ACPI : EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
sdhci-pci 0000:03:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
rtc_cmos 00:01: System wakeup disabled by ACPI
PM: resume of devices complete after 563.787 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/100
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
sky2 0000:04:00.0 enp4s0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with 58:98:35:80:7c:13
wlp2s0: send auth to 58:98:35:80:7c:13 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 58:98:35:80:7c:13 (try 1/3)
wlp2s0: RX AssocResp from 58:98:35:80:7c:13 (capab=0x11 status=0 aid=2)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
[drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
sky2 0000:04:00.0 enp4s0: disabling interface
wlp2s0: deauthenticating from 58:98:35:80:7c:13 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.003 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ACPI : EC: event blocked
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 616.279 msecs
PM: late suspend of devices complete after 18.054 msecs
ACPI : EC: interrupt blocked
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 160.003 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 1
Broke affinity for irq 9
Broke affinity for irq 12
Broke affinity for irq 16
Broke affinity for irq 23
Broke affinity for irq 25
Broke affinity for irq 26
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Suspended for 870.722 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x4
 cache: parent cpu1 should not be sleeping
CPU1 is up
ACPI: Waking up from system sleep state S3
ACPI : EC: interrupt unblocked
sdhci-pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz.
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 164.564 msecs
PM: early resume of devices complete after 2.108 msecs
ath: phy0: ASPM enabled: 0x42
ACPI : EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:03:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
ata2.00: configured for UDMA/100
rtc_cmos 00:01: System wakeup disabled by ACPI
PM: resume of devices complete after 563.775 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
usb 2-1.2: new high-speed USB device number 3 using ehci-pci
video LNXVIDEO:00: Restoring backlight state
usb 2-1.2: New USB device found, idVendor=18d1, idProduct=4ee7
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2: Product: MotoG3
usb 2-1.2: Manufacturer: Motorola
usb 2-1.2: SerialNumber: ZY2227BZH4
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/100
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
sky2 0000:04:00.0 enp4s0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with 58:98:35:80:7c:13
wlp2s0: send auth to 58:98:35:80:7c:13 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 58:98:35:80:7c:13 (try 1/3)
wlp2s0: RX AssocResp from 58:98:35:80:7c:13 (capab=0x11 status=0 aid=2)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
usb 2-1.2: reset high-speed USB device number 3 using ehci-pci
sky2 0000:04:00.0 enp4s0: disabling interface
wlp2s0: deauthenticating from 58:98:35:80:7c:13 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ACPI : EC: event blocked
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 619.552 msecs
PM: late suspend of devices complete after 17.816 msecs
ACPI : EC: interrupt blocked
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 160.007 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 1
Broke affinity for irq 9
Broke affinity for irq 12
Broke affinity for irq 16
Broke affinity for irq 23
Broke affinity for irq 25
Broke affinity for irq 26
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Suspended for 5622.691 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x4
 cache: parent cpu1 should not be sleeping
CPU1 is up
ACPI: Waking up from system sleep state S3
ACPI : EC: interrupt unblocked
sdhci-pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz.
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 160.623 msecs
PM: early resume of devices complete after 2.105 msecs
ACPI : EC: event unblocked
ath: phy0: ASPM enabled: 0x42
sd 0:0:0:0: [sda] Starting disk
rtc_cmos 00:01: System wakeup disabled by ACPI
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
sdhci-pci 0000:03:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/100
PM: resume of devices complete after 3114.785 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
usb 2-1.2: USB disconnect, device number 3
video LNXVIDEO:00: Restoring backlight state
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
sky2 0000:04:00.0 enp4s0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with 58:98:35:80:7c:13
wlp2s0: send auth to 58:98:35:80:7c:13 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 58:98:35:80:7c:13 (try 1/3)
wlp2s0: RX AssocResp from 58:98:35:80:7c:13 (capab=0x11 status=0 aid=4)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
ACPI Error: No installed handler for fixed event - PowerButton (2), disabling (20160930/evevent-286)
sky2 0000:04:00.0 enp4s0: disabling interface
wlp2s0: deauthenticating from 58:98:35:80:7c:13 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.003 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ACPI : EC: event blocked
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 709.554 msecs
PM: late suspend of devices complete after 18.114 msecs
ACPI : EC: interrupt blocked
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 160.012 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 1
Broke affinity for irq 9
Broke affinity for irq 12
Broke affinity for irq 16
Broke affinity for irq 23
Broke affinity for irq 25
Broke affinity for irq 26
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Suspended for 2.086 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x4
 cache: parent cpu1 should not be sleeping
CPU1 is up
ACPI: Waking up from system sleep state S3
ACPI : EC: interrupt unblocked
sdhci-pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz.
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 160.565 msecs
PM: early resume of devices complete after 2.108 msecs
ACPI : EC: event unblocked
ath: phy0: ASPM enabled: 0x42
sd 0:0:0:0: [sda] Starting disk
ACPI : button: The lid device is not compliant to SW_LID.
rtc_cmos 00:01: System wakeup disabled by ACPI
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2.00: configured for UDMA/100
sdhci-pci 0000:03:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
PM: resume of devices complete after 669.327 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/100
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
sky2 0000:04:00.0 enp4s0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with 58:98:35:80:7c:13
wlp2s0: send auth to 58:98:35:80:7c:13 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 58:98:35:80:7c:13 (try 1/3)
wlp2s0: RX AssocResp from 58:98:35:80:7c:13 (capab=0x11 status=0 aid=4)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
usb 2-1.1: new full-speed USB device number 4 using ehci-pci
usb 2-1.1: New USB device found, idVendor=1d57, idProduct=5a66
usb 2-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1.1: Product: 2.4G Receiver
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: 2.4G Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:1D57:5A66.0001/input/input12
hid-generic 0003:1D57:5A66.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [2.4G Receiver] on usb-0000:00:1d.0-1.1/input0
input: 2.4G Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:1D57:5A66.0002/input/input13
hid-generic 0003:1D57:5A66.0002: input,hidraw1: USB HID v1.10 Keyboard [2.4G Receiver] on usb-0000:00:1d.0-1.1/input1

Return To teste asm fish realizado pelo programa phoronix-test-suite System Information